Saturday, December 19, 2015

Plumbing Inspection Section#1 Supply Plumbing Quiz#4

You should have finished Study Session 3 before starting this study session. This study session deals with water pressure regulators and with supply plumbing in houses.
The estimated completion time is one and a half hours.
Objectives
At the end of this study session, you should be able to:
  • Describe in one sentence the location and function of a pressure bypass or relief in conjunction with a pressure regulator.
  • Describe in one sentence the location and function of a pressure bypass or relief in conjunction with a pressure regulator.
  • List six problems commonly found with pressure regulators.
  • List seven different materials used for supply piping.
  • List the time frames when these different types of pipe were used.
  • Describe the weaknesses and strengths of each type of pipe.
  • List four common problems with supply piping.
  • Question 1

    Needs Grading
    Ungraded
    List five materials used as water supply piping.
    Selected Answer:
    1. Copper
    2. Galvanized steel
    3. Brass (yellow and red are different types)
    4. Stainless steel
    5. Polybutylene
    6. CPVC
    7,. Polyethylene
    Correct Answer:
    Correct
    - Galvanized Steel - Copper - Polybutylene (PB) - Polyethylene (PE) - CPVC (Chlorinated Polyvinylchloride) - Brass (an alloy of tin and zinc) - Stainless steel
    Response Feedback:[None Given]
  • Question 2

    Needs Grading
    Ungraded
    List three causes of rust on a regulator.
    Selected Answer:
    1. A leaking regulator
    2. Sweating piping or regulator
    3. A damp environment
    4. Regulator buried in damp soil
    Correct Answer:
    Correct 
    - A leaking regulator - Sweating piping or regulator - A damp environment or - The regulator is buried in damp soil
    Response Feedback:[None Given]
  • Question 3

    Needs Grading
    Ungraded
    List two methods of determining the difference between brass and galvanized steel piping.
    Selected Answer:
    1. Scratch to reveal the yellow or orange surface. 
    2. Using a magnet. Galvanized steel will attact a magnet while brass won't. 
    Correct Answer:
    Correct 
    - Brass piping is yellow or orange in color and galvanized steel piping is gray. - Galvanized steel will attract a magnet while brass will not.
    Response Feedback:[None Given]
  • Question 4

    Needs Grading
    Ungraded
    What are the two types of supply piping that have threaded connections?
    Selected Answer:
    1. Galvanized steel
    2. Brass
    Correct Answer:
    Correct 
    Galvanized steel and brass
    Response Feedback:[None Given]
  • Question 5

    Needs Grading
    Ungraded
    What is the color of CPVC supply piping?
    Selected Answer:
    White (Beige)
    Correct Answer:
    Correct 
    White or Beige
    Response Feedback:[None Given]
  • Question 6

    Needs Grading
    Ungraded
    What is the purpose of a water pressure regulator?
    Selected Answer:
    To reduce the supply pressure to 80PSI, typically. 
    Correct Answer:
    Correct
    In houses where the municipal water pressure may exceed 80 (or 100) psi, a pressure regulator will be installed to reduce the supply of pressure to 80 psi, typically.
    Response Feedback:[None Given]
  • Question 7

    Needs Grading
    Ungraded
    What is the special connector called which prevents this occurrence?
    Selected Answer:
    Pressure relief valve
    Correct Answer:
    Correct 
    Di-electric connector
    Response Feedback:[None Given]
  • Question 8

    Needs Grading
    Ungraded
    What occurs when copper piping is directly connected to steel piping?
    Selected Answer:
    Corrosion would happen as the result of galvanic action
    Correct Answer:
    Correct 
    Galvanic action will cause the steel to rust.
    Response Feedback:[None Given]
  • Question 9

    Needs Grading
    Ungraded
    Where does galvanized steel piping usually rust through first?
    Selected Answer:
    inside
    Correct Answer:
    Correct 
    At the threaded connections
    Response Feedback:[None Given]
  • Question 10

    Needs Grading
    Ungraded
    Where is the pressure regulator typically installed?
    Selected Answer:
    Immediately downstream of main shut-off valve
    Correct Answer:
    Correct 
    Immediately downstream of the main shutoff valve.
    Response Feedback:[None Given]
  • Question 11

    Needs Grading
    Ungraded
    Which two of the three grades of copper pipe can be used underground?
    Selected Answer:
    Type L and  Type K
    Correct Answer:
    Correct 
    Types L and K
    Response Feedback:[None Given]
  • Question 12

    Needs Grading
    Ungraded
    Why is a bypass necessary if a pressure regulator is installed?
    Selected Answer:
    It is used to relieve the pressure built in house which is bigger than city side. 
    Correct Answer:
    Correct 
    To allow excess pressure in the plumbing system to be dissipated through the water service pipe out into the city mains.
    Response Feedback:[None Given]
  • Question 13

    0 out of 0 points
    Correct
    When was copper supply piping first used?
    Selected Answer:
    Correct 
    1930's
    Answers:
    Correct 
    Response Feedback:
    Good work
  • Question 14

    0 out of 0 points
    Correct
    Connections with galvanized steel supply piping must always be threaded.
    Selected Answer:
    Correct True
    Answers:
    Correct True
    False
    Response Feedback:
    Good work
  • Question 15

    0 out of 0 points
    Correct
    Polybutylene supply piping resists freezing better than copper supply piping.
    Selected Answer:
    Correct True
    Answers:
    Correct True
    False

No comments:

Post a Comment